What Is Actually Printed on a GRA Card
Quick answer: A gra card prints a short list of facts about one stone: that it is moissanite, a colour and clarity grade, the shape, the measurements in millimetres, the carat or diamond-equivalent weight, and a serial number. Some carry a QR code, a signature line or a date. What it does not print is an independent laboratory's finding, a cut grade, or any number you can look up in a public archive.

Buyers ask what is on the card because it is often the only paperwork in the box, and it looks more official than it is. Knowing which fields to trust, which to check and which are simply not there turns a confusing piece of card into a useful one.
What a gra card is, and what it is not
It is a trade document issued by the party selling the stone — a cutter, a wholesaler, a factory. It travels with the parcel so that the stone can be identified on arrival and so that the buyer has a written description of what was supplied. That is its function, and it performs it well.
It is not a laboratory report. No independent grader measured the stone, there is no archive behind the number, and the grade is the supplier's own statement. If a seller describes the card as a certificate from an independent laboratory, that is the moment to slow down.
The front: stone type and serial number
The card names the material. On ours that word is moissanite, and it is the single most important field on the card, because it is the claim everything else hangs from. A card that says diamond when the stone is silicon carbide is not a mistake in formatting; it is a different product.
The serial number is the second field. It ties the card to the parcel in the seller's records. It is not a laboratory report number and will not resolve on any public database, but it is what you quote when you contact the seller about a problem, and it is what makes the card specific to your stone rather than a generic insert.
The grade fields: colour and clarity
Most moissanite cards state a colour grade and a clarity grade. Ours reads D colour and VVS1, which is the standard the factory sorts to before packing. A buyer should read those two fields as a description of the goods, in the same way a specification sheet describes a fabric.
What the fields cannot tell you is how the grade was arrived at. There is no published procedure behind a card programme, no referenced master stone set, no grader's note. Two suppliers can both print VVS1 and mean slightly different things. That is why the grade is the weakest part of the card and the measurements are the strongest.
The measurements line
The card typically gives diameter in millimetres for a round, or length by width for a fancy shape, plus a carat figure or diamond-equivalent weight. This is the field to check first, because it is the only field you can verify with a cheap tool and no training.
Callipers cost very little. Measure across the widest point, compare with the card, and allow a few hundredths of a millimetre for error and cut tolerance. A 6.50mm stone measuring 6.48mm is fine.
| Field on the card | What it claims | How you check it |
|---|---|---|
| Material | Moissanite, silicon carbide | Read it against the invoice and the listing |
| Colour and clarity | Supplier's stated grade, e.g. D / VVS1 | Cannot be verified without comparison stones; accept or have appraised |
| Shape and cut style | Round brilliant, oval, emerald and so on | Visual check against the listing photos |
| Measurements | Millimetres, and carat or equivalent weight | Callipers and a scale; the most reliable field |
| Serial number | Links card to parcel in seller's records | Ask the seller what it corresponds to |
What is not printed on the card
No cut grade. Cut is what governs how much light comes back out of the stone, and no card programme scores it. No polish or symmetry grade. No fluorescence comment, no proportions, no table percentage, no pavilion depth.
No issuing laboratory's accreditation, no independent signature, no archive reference. If you have seen a card that appears to carry those things, read the small print carefully: a logo is not accreditation, and a QR code that opens a seller's own page is not a public record.
Card versus laboratory report
An IGI or GIA report is produced by an organisation that did not sell the stone, using instruments, and held in an archive so the number can be checked years later. A card is produced by the seller, from a template, with no archive outside the seller's own files. Those are not the same product and should not be priced as though they were.
This is also why GIA never appears on a moissanite card: GIA does not grade moissanite. Our laboratory-grown diamonds carry IGI reports; our moissanite carries a GRA card. The document follows the value of the goods — a report on a $23.14 loose stone, our median across 117 loose listings, would cost more than the stone.
Checking the card against the stone
Do it on arrival, not in six months. Lay the stone on the card, check the shape, and measure across the widest point with callipers. A 6.50mm stone that measures 6.48mm is tolerance. A 6.50mm stone that measures 5.90mm is a different stone. If the piece is set, measure the stone rather than the setting — a bezel adds a millimetre of metal each side and makes a 6.5mm stone look like 8mm.
If something disagrees, photograph the stone against a ruler, photograph the card, and send both to the seller with the serial number. Either the wrong stone was packed or the wrong card was inserted — both fixable, neither worth leaving unresolved.
A card that arrives blank in the grade fields, or with measurements handwritten and corrected, deserves a question. Volume operations print by machine; corrections by hand suggest a card filled in after the fact.
What we print on ours
Material, colour and clarity as sorted, shape, millimetres, carat or equivalent weight, and a serial number, printed at our factory in Wuzhou. We do not print a laboratory's name, because the card is not a laboratory document. If a piece arrives with a card that is missing, damaged or contradicts the stone, write to sales@holycome.com with the number and a photo and we will replace or correct it.

FAQ
What does a gra card actually prove?
That the seller described this stone in writing at the point of sale, with a number tying the card to the parcel. It does not prove an independent laboratory examined the stone.
Is the number on a gra card a certificate number?
It is a serial number in the seller's records, not a laboratory report number. There is no public archive to look it up in, the way there is for IGI and GIA reports.
Can the grade on a gra card be wrong?
It can be optimistic. The grade is the supplier's statement, reached by whatever procedure that supplier uses. It is not an independent finding, and it should not be treated as one.
Should the card list the metal?
Usually not — the card describes the stone. Metal is stamped on the piece itself: 925 for sterling silver, 9K, 14K or 18K for gold, PT950 for platinum. Check the stamp rather than the card.
Does a missing card mean the stone is not moissanite?
No, but it means you have no written description to check against. Ask the seller to reissue it, and keep the invoice, which carries the same information in a form that is harder to lose.


