How a Ring Budget Breaks Down: Stone, Metal, Labour
Quick answer: The median ring in our catalogue costs $94.49, three costs added together: the stone, the metal and the labour. At $80 you are buying 925 silver and a modest stone. At $150 there is room for 14K gold. At $350 you are on the 18K median of $345.80. Money above the baseline belongs in cut, setting security and alloy, not in carat.
From our own catalogue of 708 pieces, priced 17 November 2026. Site median $95.42, interquartile range $66.65 to $169.26, full range $13.02 to $6,260.80.
What the median ring actually buys
Rings are the cheapest wearable category we make: $94.49 against $99.44 for earrings, $111.48 for necklaces and $122.14 for bracelets. Loose stones sit at $23.14, which is the clue to the structure. A ring is mostly one stone, a little metal and a short run of bench work.
Half of everything we sell falls between $66.65 and $169.26. That $102.61 spread is about two variables, and only one of them is the one buyers argue about.
Three bills inside one price
Every ring is a stone purchase, a metal purchase and a labour purchase, and the three move independently. That is why two rings at the same price can be different objects.
| Component | What sets the cost | Cheapest sound version | Where the saving shows |
| Stone | Carat, colour, clarity, cut, certificate | Small GRA D colour VVS1 moissanite | Fire in low light; presence across a table |
| Metal | Alloy and gram weight | 925 sterling, 1.8 mm shank | Wear at the base of the band; tarnish |
| Labour | Stone count, setting type, finishing | Four-claw setting, simple polish | Loose stones; uneven prongs; hollow gallery |
Labour is the line buyers underestimate. Forty stones in a pavé band mean forty seats drilled, forty stones set and forty beads burnished by hand. A reinforced shank and a proper gallery cost more than a hollow one and outlast it by years.
Metal moves the price more than anything else
Put the same design in four alloys and the median price of each alloy band tells you what gold content does to a budget.
| Metal | Median price | Index (silver = 100) | Step change |
| 925 sterling silver | $97.11 | 100 | Baseline |
| 14K gold | $183.46 | 189 | +88.9% |
| 18K gold | $345.80 | 356 | +88.5% |
| PT950 platinum | $561.47 | 578 | +62.4% |
Each alloy step roughly doubles the price, and silver-to-14K is the steepest. 9K sits between them. If a ring feels expensive, the metal is usually the reason.
Carat is not the lever people think
| Stone weight | Median price | Change |
| 0.5 ct | $88.46 | — |
| 1 ct | $99.18 | +12.1% |
| 2 ct | $103.23 | +4.1% |
| 3 ct | $103.72 | +0.5% |
From 0.5 ct to 3 ct the median rises 17.3 per cent; from silver to 14K it rises 88.9 per cent. At GRA D colour VVS1 the rough is not the expensive part of the ring. If you want visible size, buy it, because size is cheap here relative to metal.
The $80 build
Eighty dollars is 85 per cent of the ring median, so you are buying below the middle of the catalogue, in silver. 925 is durable with care and takes a polish well. Specify a 0.5 to 1 ct GRA D colour VVS1 stone, four claws, a 1.8 to 2 mm shank and a closed gallery if the design allows.
At this price pavé, hand engraving, 18K and IGI diamonds are out. Asking for them means something else is quietly downgraded, usually the prongs.
The $150 build
At 1.59 times the ring median and just under the upper quartile of $169.26, this is the 14K entry point. The 14K median is $183.46, so $150 buys a plain 14K solitaire with a 1 ct stone rather than extra stone work.
The real choice is 14K at 1 ct, or silver at 3 ct with pavé shoulders. Take the gold. A large stone in a silver mount is doing more work than the mount was designed for.
The $350 build
Three and a half times the ring median and almost exactly the 18K median of $345.80. Here the metal is the purchase: 18K, a 1 to 2 ct stone, a proper gallery, formed prongs, and pavé shoulders only if the setting quality holds.
What $350 does not buy is platinum, at a $561.47 median. If platinum matters more than size, wait rather than stretch this tier.
What is worth paying extra for
Cut first: the only stone property that changes how a ring looks in ordinary light. Setting security next, because formed prongs and a seated gallery separate a ring that lasts decades from one that loses a stone in year three. Then alloy matched to the hand, and sizing margin so the ring can be altered once.
Not worth paying for: clarity and colour above the visible threshold, brand premiums on generic designs, packaging, and carat bought at the expense of the mount.
What we make
We have run our own factory in Guangxi since 2008, making rings in 925 sterling silver, 9K, 14K, 18K gold and PT950 platinum, set with GRA D colour VVS1 moissanite or IGI-certified laboratory-grown diamond. Because we make rather than resell, the listing price is those three bills added together, with nothing appended for a name on the box.
Shipping is free over $99 and $5.99 below it, so an $80 ring carries the flat rate and a $150 ring does not. Returns run 30 days on unworn pieces in original packaging; engraved and custom pieces cannot be returned.
FAQ
Is $94.49 realistic for an engagement ring?
It is the median of our own ring catalogue, so it is realistic for what we make: silver or entry 14K with a GRA D colour VVS1 moissanite. It is not a diamond price.
Spend more on the stone or the metal?
Metal first, up to 14K. That step costs 88.9 per cent more at the median and changes how the ring wears daily; between 1 ct and 2 ct the median moves only 4.1 per cent.
Why is a 3 ct ring only 17 per cent more than a 0.5 ct ring?
The median runs across finished pieces, and at these grades the rough is a small share of the total. Labour and alloy dominate, which is why a large stone in a thin mount is cheap to make and not automatically better.
Does the price include sizing?
Where the design allows, yes, before dispatch. Worn rings cannot be returned and engraved bands not at all, so send a measurement rather than a guess.