How to Read a Jewelry Quotation
Quick answer: A jewelry quotation is only comparable when it states five things: whether stones are included, the metal weight and metal price basis, the labour charge per piece, what finishing and plating is covered, and whether packing and freight are inside the number. Add the quantity tier and the date the price expires. A quotation missing any of those is not a price, it is an opening position — and the difference usually shows up later, on an invoice.

Most buyers compare unit prices and take the lowest. That works only when the specifications are identical, which they rarely are. Reading a quotation is mostly a matter of finding what has been left out.
What a jewelry quotation must answer before it can be compared
A useful quotation reads like a specification with numbers attached. Metal and its purity, the stone type and size, the setting style, the finish, the plating, the packing, the quantity, the incoterm, the currency and the validity. Two quotations for "a 925 silver pendant, 18mm, with a 5mm stone" can differ by a factor of three and both be honest.
The fastest way to test a quotation is to send it back with one line changed: same design, one metal upgrade, or stones swapped from cubic zirconia to moissanite. A supplier who can re-price instantly has a real cost model. One who cannot is guessing, and the guess gets corrected later.
Stone in, stone out: the biggest single gap
"Does this include the stone?" is the first question, and the answer is often ambiguous by design. Some quotations price the setting only, with the stone billed separately at the prevailing rate. Others bundle a nominal stone into the piece and quote the stone separately only above a certain size.
Ask for the stone cost as a separate number even if you intend to buy it bundled. It tells you what the supplier is actually charging for the setting, which is the part you are really buying, and it lets you model a swap later without renegotiating the whole quotation.
The same applies to stone grading. Moissanite at D colour and VVS1 is not the same input as commercial-grade material, and a quotation that says only "moissanite" has told you nothing about which one you are paying for.
Labour and metal should never be one line
Metal moves with the market. Labour does not, or moves much more slowly. When they are merged into a single unit price, you cannot tell whether a price change next quarter is the gold price or a supplier repricing their work — and you have no basis for arguing about either.
Ask for grams per piece and the metal rate applied, plus a per-piece labour charge. On silver the metal is a small share of the total; on 14K or 18K it can dominate. Our median gold listing retails at $345.80 against $97.11 for silver, and most of that gap is metal rather than work.
Plating: what "included" is hiding
Rhodium over white gold, gold plating over silver, antique finishes, e-coating for tarnish resistance — each is a separate process with its own cost and its own failure mode. A quotation that says "plated" without a thickness is telling you the process exists, not what you are getting.
Ask for the micron figure, and whether the plating is rack or barrel. Rack plating on a chain covers more evenly and costs more; a two-micron plate wears very differently from a half-micron flash. If your product page will claim a thickness, the number has to come from the quotation.
Packaging, labels and freight
Three things sit outside most unit prices and inside most surprises. Packaging — pouches, boxes, cards, hangtags, barcodes — is often quoted per piece at a small number that grows at volume. Origin marking and labelling are separate operations.
Freight is a different question. Ask for the incoterm by name: EXW, FOB, CIF, DDP. Under EXW the buyer pays from the factory door, which is the cheapest-looking number and the most expensive in practice. DDP is the only term where landed cost equals quoted cost. If the quotation does not say, it is EXW in most factories' minds, whatever the buyer assumed.
The validity date and the metal basis
Every quotation should carry a date after which it lapses. Metal prices move daily; a quotation with no expiry is either an error or a commitment the supplier cannot honour. Ninety days is common on silver, much shorter when gold is volatile.
Look for the metal basis: the rate per gram the price was built on. A quotation saying "gold at today's rate" without a number is unenforceable in both directions. With a stated basis, a later invoice can be checked with arithmetic.
| Line on the quotation | What it should state | What goes wrong without it |
|---|---|---|
| Stone | Type, grade, size in mm, included or separate | You compare a set price against a setting-only price |
| Metal | Purity plus grams per piece plus rate basis | Price rises blamed on gold with no way to check |
| Labour | Per-piece charge, stated separately | No visibility on where the cost actually sits |
| Plating | Process and micron thickness | "Plated" turns out to be a flash coat |
| Packing | Per-piece cost, what is inside the box | Pouches and cards arrive as a separate invoice |
| Freight | Named incoterm and destination | Landed cost differs from quoted cost by a wide margin |
| Validity | Expiry date and metal rate reference | Price changes with no agreed mechanism |
| Quantity tier | The break points and what triggers them | You order the wrong number to hit a price |
Quantity tiers and the break point
Tiered pricing is normal, and the breaks usually reflect real cost steps: mould amortisation, casting batch size, plating barrel minimums, packing runs. A quotation offering one price at any quantity is either very simple or not costed.
Ask where the next break is and what drives it. If the answer is "when the casting tree fills", you have learned how to plan a reorder. If it is a shrug, the tiers are invented.
Six questions to send back before you approve
- Is the stone included, and at what grade and measured size?
- How many grams of metal per piece, at what rate?
- What plating, at what thickness, and is it rack or barrel?
- What is in the box, and is packing inside the unit price?
- Which incoterm, and to which address?
- When does this price expire, and what is the metal basis?
Any supplier who finds those questions irritating is telling you something. Ours are answered on the quotation itself.

FAQ
Why are two jewelry quotations for the same design so far apart?
Usually one is a setting price and the other includes stones, or one is EXW and the other delivered. Metal weight tolerance and plating thickness account for most of the rest.
Should a jewelry quotation include the stone?
Either is workable if it is stated. What is not workable is ambiguity, because you cannot compare two numbers that measure different things.
Is a lower unit price always better?
No. A price excluding plating, packing or freight is not lower, it is incomplete. Convert everything to landed cost per sellable piece before comparing.
What if the quotation has no gram weight?
Ask for it. Without grams and a metal rate you cannot separate a genuine cost change from a repricing, and your retail margin calculation has a hole in it.
If you want a quotation that answers all of the above without a follow-up email, send the design and target quantity to sales@holycome.com, or work through the options on our custom jewelry services page first.
If you are sourcing this for a production run, send your spec through our custom jewelry services page or write to sales@holycome.com">sales@holycome.com. We answer Monday to Saturday, 09:00–18:00 GMT+8.