Custom Moissanite Earrings: An OEM Order
Quick answer: A custom moissanite earrings order runs through five stages that each end in a written approval: the brief, the CAD, the sample pair, the bulk run and the inspection. Everything after the brief is execution. The brief decides the money, and the sample pair is where you find out whether the factory can make two of the same thing.

What an OEM order for custom moissanite earrings covers
An OEM earrings order is not an open design service. It is a manufacturing service against a specification: you bring the design intent, the factory brings the model, the mould, the setting and the finishing. The output is a repeatable pair, not a one-off piece.
That distinction matters because earrings are ordered in matched pairs and often in a size run. A pair that matches in a photograph can still differ in stone size, drop length or back tension — the three things a customer notices in the hand.
The brief: the decisions that lock everything else
Six things need a decision before a drawing is worth making: metal and purity, stone type and grade, stone size in millimetres, the finding (stud, huggie, drop, hoop, threader), the finish, and the packing the pair ships in.
Two more that buyers leave late and regret: the back type — push, screw, lever or friction — and whether the pair must sit symmetrically on the ear. Both are cheap in CAD and expensive after a mould has been cut.
Write the brief as numbers, not adjectives. "Drop length 28 mm, stone 6.5 mm, 925 silver, rhodium, screw backs" can be quoted today. "Elegant everyday drop" cannot be quoted at all.
CAD and drawings: what to approve, what to question
Approve the model, not the render. Ask for orthographic views with dimensions, a metal weight estimate, the stone count and the setting type per stone. A rendering shows what the piece wants to look like; a dimensioned drawing shows what it will be.
Question three things specifically: the thickness of metal behind the stone (too thin and the setting will flex), the clearance at the hinge or post joint, and the smallest stone the seat can hold. Those are the three numbers most often assumed rather than agreed.
The sample pair
The sample is the contract in physical form. Check that the two pieces match each other — stone size to a tenth of a millimetre, drop length, post length, back tension — and that both match the drawing. Weigh them; a pair that is 0.3 g light is a pair with thinner metal somewhere.
Then wear them for a day. A drop that hangs forward, a post too short for a thicker lobe, a huggie that pinches: none of these show up on a bench mat.
Moulds, casting and the cost of a change
Once a mould is cut, changes are no longer free. A stone size change may need a new seat; a finding change may need a new mould entirely. Ask before the sample is approved what the policy is at each stage, and get the answer in writing while you still have leverage.
Ask who owns the mould. If you paid for the tooling, the mould should be yours, stored at the factory and used only on your orders. That one clause protects the design better than any non-disclosure agreement.
Matching stones for a pair
Earrings need stones that match each other, which is a harder request than grading each stone individually. Two D colour VVS1 moissanite stones can still differ visibly in body tone, or in how bright the cut reads when they sit 30 mm apart on a face.
Ask how the factory pairs stones: by measurement, by grade from the GRA cards, or by eye under a lamp. The answer should include all three. Ask also what happens to the unmatched stone in a pair — it should go back into stock, not onto your invoice.
Findings, backs and finishing
Findings are where custom earrings quietly fail. Screw backs that thread badly, friction backs that loosen, hinges that develop play: all are bought-in parts, and the factory's choice of supplier decides how they behave after six months.
Finishing comes next: polish, plating thickness, and whether the pair is e-coated. Rhodium over silver is standard; ask the thickness, and ask whether the posts are plated too, since that is the part in constant contact with skin.
QC and bulk release
Agree the inspection list before bulk starts: stone count, stone grade against the card, dimensions against the drawing, plating appearance under specified light, back function tested on every unit, pairing check on every pair.
Then agree what happens with a reject. A factory with a defined rework route will say where the piece goes and how long it takes. One that says "we will fix it" has not thought about it.
| Stage | What you receive | What your approval locks |
|---|---|---|
| Brief | Written spec: metal, stone, sizes, finding, finish | Scope and price basis |
| CAD | Dimensioned drawings, metal weight, stone count | Geometry and tolerances |
| Sample pair | Two finished pieces, weighed and measured | Mould and production standard |
| Bulk run | Units on the production line | Quantity and delivery window |
| Inspection | Checked units, packing, documents | Release and payment balance |

FAQ
How long does a custom moissanite earrings order take?
It depends on whether a new mould is needed. A new model adds CAD time and tooling before production starts; a repeat style on an existing mould is a scheduling question. Ask for the time by stage rather than one total, so you can see where it sits.
Can I order one pair as a sample and then bulk?
Yes, and you should. Ask that the sample be made on the same line as the bulk run, and confirm the mould is kept for the repeat order.
Do I own the design if I pay for the CAD?
Only if the agreement says so. Design ownership, mould ownership and exclusivity are three separate clauses; settle all three in writing before the first sample is made.
Can the stones be laboratory-grown diamond instead of moissanite?
Usually, in the same mounting with an adjustment for the different proportions. Laboratory-grown diamond carries an IGI report rather than a GRA card, which changes the paperwork and the packing.
What is the most common mistake in a first custom earring order?
Approving a sample without measuring it. Stone size, drop length, weight and back tension are all numbers, and a pair that is a few percent off on all four is a pair your customer sends back.
Starting with the spec
Holycome has manufactured jewellery in Wuzhou, Guangxi since 2008, in an 8,000 square metre factory, and ships to more than 100 countries. Earrings are made in 925 sterling silver, 9K, 10K, 14K and 18K gold and PT950 platinum, set with D colour VVS1 moissanite with a GRA card, IGI-certified laboratory-grown diamond, or laboratory-grown emerald, ruby and sapphire. Send the six brief decisions above — metal, stone, size, finding, finish, packing — through our custom jewelry services page or to sales@holycome.com, and we will come back with the questions that are still open. Monday to Saturday, 09:00–18:00 GMT+8.