How to Check an IGI Certificate Number

Quick answer: An igi certificate check takes about two minutes. Go to IGI's own website, open its report-verification page, type the number exactly as printed on the document, and compare what comes back — stone type, shape, weight, measurements and grades — with the stone in your hand. If the number returns nothing, or returns a different stone, ask the seller before drawing conclusions.

How to Check an IGI Certificate Number

The check matters because a report number is only useful if it resolves to the stone you bought. A seller can print any number on an invoice, and a photograph of a report proves nothing about which parcel the report travelled with. What makes an IGI report worth having is that the laboratory, not the seller, holds the record — and you can read it yourself.

The igi certificate check in five steps

  • Find the report number, usually printed on the front of the report and repeated on the stone's girdle.
  • Open IGI's website directly, not through a link in a message or a QR code on a card.
  • Enter the number in the verification field, without spaces or dashes unless the field requires them.
  • Read the record: stone type, shape, carat weight, measurements, and the grades assigned.
  • Compare with your stone and your invoice. Photograph the screen if you want a record.

Five minutes of work, and it settles a question that no amount of seller reassurance can settle. If the record matches, you have independent confirmation. If it does not, you have a specific question to put to the seller.

Where the number is printed

On the report itself, near the top, usually labelled as the report number. It is also printed on the document's own barcode or data block, and IGI's laboratory-grown reports may carry a prefix in the number that identifies the programme. Do not retype from memory — copy it character by character, because one transposed digit returns either nothing or, worse, a different stone.

Keep the paper. A report is a physical document with security printing, and the online record is a convenience layered on top of it, not a replacement. If you are buying second-hand, the paper and the online record together are what you want to see.

Where the number is on the stone

Laboratory-grown diamonds graded by IGI are usually laser-inscribed on the girdle with the report number and a laboratory-grown mark. The characters are tiny — a few tenths of a millimetre tall — and you need a 10x loupe and a steady light to read them. Many jewellers will read an inscription for you at no charge if you ask politely.

The inscription is the link between paper and stone. A report number that resolves online but cannot be found on the girdle is not proof of fraud — inscriptions can be polished away during a re-cut, and some stones are never inscribed — but it is a gap worth noting, especially on a stone sold as newly cut.

What the online record returns

The record is the laboratory's own file: the shape, the carat weight, the measurements in millimetres, the proportions, and the grades for colour and clarity, plus the finish grades where the report includes them. For laboratory-grown diamonds the record also states the origin of the material as grown rather than natural.

Read the measurements, not just the weight. Two 1.02ct rounds can differ in diameter by a third of a millimetre, and the measurement line is what lets you confirm you are looking at the same stone rather than a similar one.

Field What to compare it with
Stone type and origin The invoice, and the word "laboratory-grown" in the listing
Shape and cutting style The stone itself, not the product photo
Carat weight Your scale, if the stone is loose; the invoice if set
Measurements Callipers across the widest point
Colour and clarity grades The grades quoted in the listing — they must match exactly
Girdle inscription The number under a 10x loupe

What the report grades, and what it does not

A report describes the stone: proportions, weight, colour, clarity, finish. It is an identification and grading document produced by a laboratory that did not sell the stone.

It is not an appraisal, and it does not state a value. It also does not tell you whether the design is good, whether the setting is well made, or whether the price is fair. Those judgements stay with you, which is why a report is a starting point rather than a verdict.

Why a lookup sometimes fails

The number was mistyped. The report belongs to a different programme with a different prefix. The report is old and the number has been superseded by a re-grade. Or the document is not what it appears to be — a copy, an altered print, or a number lifted from another stone's report.

None of these can be diagnosed from the outside. What you can do is ask the seller for the number in writing, check it yourself, and compare the record with the stone on arrival. A seller who will not supply a report number for a stone advertised as IGI-graded has answered your question already.

"Certificate" versus "report"

The trade says certificate; laboratories mostly say report. The difference is not pedantry — a report is a laboratory's opinion on a specific stone at a specific time, not a guarantee of quality or a certificate of authenticity in the legal sense. IGI's own documents are titled as reports, and the verification page is a report check, not a certificate registry.

Practically, this matters when someone sells you "an IGI certificate" for a moissanite. IGI reports are issued for diamonds, natural and grown; a moissanite from us travels with a GRA card instead. If a seller offers an IGI document for moissanite, get the number and check what the record actually describes.

What we send with a lab-grown diamond

Every laboratory-grown diamond piece from our factory in Wuzhou ships with its IGI report, and the report number is on the invoice so you can check it before the parcel is even opened. Moissanite pieces ship with a GRA card, which is a trade document rather than a laboratory report — different document, different stone, no overlap.

If a report number does not resolve, or the record describes a stone other than the one you received, write to sales@holycome.com with the number and photographs before wearing the piece. That is a problem we can fix; a year of doubt we cannot.

How to Check an IGI Certificate Number

FAQ

Where do I do an igi certificate check?

On IGI's own website, using its report-verification field. Type the number from the report itself rather than following a link from a seller, so you know which site you are reading.

Is the number on the report the same as the one on the stone?

It should be. Laboratory-grown diamonds graded by IGI are usually inscribed on the girdle with the report number. Read it under a 10x loupe and compare character by character.

What if the lookup returns a different carat weight?

Then the number belongs to another stone, or the stone was swapped. Stop, photograph everything, and put the discrepancy to the seller in writing with the report number quoted.

Does an IGI report state a value?

No. It describes and grades the stone. Valuation is a separate exercise, done by an appraiser, and it is not part of a grading report.

Can I check an IGI report for moissanite?

There is nothing to check, because our moissanite is not IGI-graded — it ships with a GRA card. If you are offered an IGI number with a moissanite, verify what the record says the stone is.

Leave a comment

All blog comments are checked prior to publishing
You have successfully subscribed!
This email has been registered